NERC PRC-019-2 is intended to verify coordination of generating unit facility or synchronous condenser voltage regulating controls, limit functions, equipment capabilities and protection system settings.
On generator 2 at Roland C. Dansby Power Plant for Bryan Texas Utilities, we conducted a review of coordination between
SynchroGrid reviewed substation settings to ensure compliance with NERC PRC-002-2 for Cross Texas Transmission.
SynchroGrid replaced a distribution transformer and a relay panel at the BTU Nall Lane substation.
SynchroGrid reviewed protection relay settings for Pattern Energy's Panhandle substation.
SynchroGrid reviewed the protection relay settings for Pattern Energy's Panhandle substation.
SynchroGrid performed engineering calculations to verify that relay settings were in compliance with NERC PRC-019-2 for all wind farms located in the United States.
SynchroGrid implemented NERC PRC-025-1 Generator Relay Loadability to assess load response settings.
SynchroGrid created standard relay maintenance procedures and documentation to ensure compliance with NERC PRC-005-6 for Bryan Texas Utilities.
SynchroGrid reviewed the protection relay settings for Bryan Texas Utilities to ensure compliance with PRC-024-2.
SynchroGrid created an innovative process that has simplified the verification of generator protective relays for NERC PRC-025 compliance.
SynchroGrid performed extensive calculations for wind farms across Canada to ensure that their relay settings were in compliance with a number of NERC-PRC standards.